PROFESSIONAL PRODUCTS

Due to the up and down movement of the pistons, the piston rings will wear out. The O-rings will also lose their elasticity after a while.

This result in:

• Loss of compression
• Oil burning which results in oil consumption
• Blue smoke
• Oil leakage
• More engine noise

THE SOLUTION

Wynn’s Super Charge

• Reduces oil consumption
• Restores the compression and oil pressure
• Reduces engine noise
• Reduces exhaust gases
• Stops oil leakages by rejuvenating oil seal rings and O-rings.

Whenever an oil change is made there is always a part of the old oil that remains in the system.

This result in:

• Formation of deposits and sludge
• Reduction of oil life time

THE SOLUTION

Wynn’s Engine Flush

• Removes sludge
• Removes deposits
• Frees sticking engine components

In the gearbox there will be wear after a while specially in town traffic where a lot of shifting is required.

This result in:

• More noise from the gearbox
• More difficult shifting

THE SOLUTION

Wynn’s H.P.L.S.

• Reduces friction and wear in the gearbox, steering gear, reduction gear, differential, reduction axle and reverse gear
• Retards oil oxidation
• Makes shifting easier
• Reinforces the oil film at high load
• Reduces noises

Oil soluble supplement containing no solid particulars.

High in EP agents which:

• Reduce friction and wear.
• Stop the formation of sludge and deposits.
• Prevent oxidation and premature oil thickening.
• Retard oil ageing and fouling of the oil filter.

For petro and diesel engines with or without turbo charger.

Does not harm catalytic convertors compatible with the mineral, synthetic single and multigrade oils.

Wynn’s underbody coating is a durable, thixotropic fast drying anti corrosion treatment based on bitumen. The product has excellent sound deadening effects and offers a durable protection to the chassis of cars, trucks and coaches. After drying, a tough adhesive film remains which resists against various climates and gravel.

Features:

Very good adhesion to a wide range of substrates. Very good resistance of weathering, spray water and abrasions. Proven track records.

Rust and scale can cause serious problems to the radiator. It can damage the radiator and finally cause leaks. Besides, scale deposits inside the radiator can have a negative effect on a good heat transfer of the radiator. The engine temperature will be too high which will result in accelerated engine wear. The isolating effect of 1 mm of scale can be compared to the isolating effect of 10 cm of cast iron.

THE SOLUTION

Wynn’s Radiator Flush

• Removes scale and rust
• Dissolves oil and greasy residues
• Keeps dirt in suspension

Due to the formation of rust and scale the radiator will not function efficiently anymore. The radiator will not be able to transfer the heat properly overheating of engine severe damage.

THE SOLUTION

Wynn’s Radiator Protector

• Prevents the formation of rust and scale
• Protects aluminium parts against corrosion
• Extends lifetime of antifreeze

Due to rust and corrosion formation in the radiator small holes can be created radiator leakage.

THE SOLUTION

Wynn’s Radiator Stop - Leak

• Stops and prevents leaks in the cooling system
• Prevents the formation of rust, corrosion and scale.

• Dissolves gum, varnish and deposits without dismantling.
• Reduces CO and HC levels
• Doest not harm catalytic converters.
• Suitable for all Air Intake Components such as EGR.
• Blasts away gums, varnish, sludge and deposits.
• Restores Injector performance
• Corrects rough idling and stalling
• Promotes maximum fuel economy.
• Allows adjustment of CO and HC levels in exhaust gages to required standards

A Unique product for 1001 application for professional and domestic use.

• Removes water and forms a protective film
• Reduces squeaking and grinding noises
• Frees rusted parts in no time thanks to its fast penetrating formula
• Starts wet engines, Lubricates hinges, small wheels and protects

Wynn’s RCP treatment is unique way for cleaning injectors, carburettors, valves, combustion chambers and the rest of the fuel system in less than 45 minutes without dismantling anything.

The RCP system has been approved by several car manufacturers ( Maruti and Hyundai Motor in India) and has been approved by the well respected institute TUV in Germany.

In less than 45 minutes the RCP treatment will make your car like new. The moment you start your engine you will feel the difference.

• Removes pollen and nicotine from the evaporator
• Disinfects and eliminates microbes, fungi and bacteria
• Removes cause of allergic reactions (sneezing, coughing, irritation to eyes)
• Gets rid of unpleasant smells
• Cleaning action of the detergents against all impurities.

Aircomatic II

• Easy to use, no supervision necessary during treatment
• Ultrasonic cell vaporises product into small drops of < 5 micron
• The vapour is blown towards the evaporator of the air-conditioning by means of a built-in ventilator
• Low voltage = safe of use
• The machine automatically calculates the correct treatment time (approximately 15 minutes at 22⁰C)
• Outlet tube to direct the vapour flow

Powerful product for cleaning and degreasing of mechanical parts.

Properties

• Removes oil, brake fluid, grease and other dirt from metal components
• Eliminates dust from brake and clutch parts.

Absorbs condensation water in the fuel system (suitable for diesel and petrol engines)

Properties

• TUV approved
• Protects against rust and corrosion
• Prevents icing in the carburettor and fuel filter
• Provides a better cold start performance

Injector cleaner for diesel engines to be used with the Wynn’s RCP machine.

Properties

• TUV certified
• Cleans injectors, pump and combustion chambers
• Restores the injector spray pattern and improves combustion
• Reduces emissions of noxious exhaust gases and soot
• Harmless to catalytic converters.

Injector cleaner for petrol engines to be used with the Wynn’s RCP machine.

Properties

• TUV certified
• Cleans valves, injectors, combustion chambers and other vital parts in fouled petrol systems of carburettor and injection engines without dismantling
• Frees sticking exhaust valves
• Harmless to catalytic converters
• Reduces emissions of noxious exhaust gases
• Restores the injector spray pattern and improves combustion

Restores efficient working of hydraulic valve lifters.

Properties

• Releases sticking valve stems and hydraulic valve lifters
• Dissolves dirt, gum and varnish deposits in the oil channels
• Contains anti-wear additives
• Quietens valve train noise

Silicone based lubricant.

Properties

• Provides dry lubrication
• Reduces static electricity
• Prevents sticking of materials
• Water and moisture repellent
• Does not stick, stain and oxidize

Multifunctional lubricant and penetration oil.

Properties

• Quickly frees locked, rusted or corroded parts
• Lubricated and cleans precision parts and devices
• Repels water and moisture
• Stops squeaking and creaking
• Prevents short circuits in electrical systems

Strongly adhesive and highly viscous synthetic lubricant.

Properties

• Exceptionally adhesive to surfaces
• Water-repellent and water-resistant
• Reduces and dampens noise of mechanisms
• Resists steam washout, solvents, high temperatures and acids
• Compensates for variation in clearance and pressure

Protects high-pressure injection systems such as common rail and pump/injector against excessive wear and fouling.

Properties

• Inhibits ageing (oxidation) of the diesel fuel caused by high fuel temperatures in these systems.
• Compensates for lack of lubricity in low sulphur fuels.
• Protects stressed metal surfaces in the high-pressure pump and injectors against wear caused by insufficient lubrication of “dry” fuel.
• Cleans the fuel pump, the common rail and the injectors and restores the original spray pattern resulting in a better combustion.

Properties

• Increases the Octane number (RON) by 2-5 points
• Improves engine performance and acceleration
• Safe for use with catalytic convertors and turbochargers